NEC N8100-1223F, Руководство пользователя

Страница: 355 / 482

Troubleshooting 8-61
Problems with Master Control Menu
The master control menu fails to appear:
T
Is your system Windows NT 4.0 or later, or Windows 95 or later?
→
The Master Control menu is supported by Windows NT 4.0 and Windows 95.
T
Is Shift pressed?
→
Setting the CD-ROM with
Shift
pressed down cancels the Autorun feature.
T
Is the system in the proper state?
→
The menu may not appear depending on the system registry setting or the timing
to set the CD-ROM. In such a case, start the Explorer and run \MC\1ST.EXE in
the CD-ROM.
Problems with Configuration Diskette Creator
The bit map of the Configuration Diskette Creator window is not displayed correctly
during setting of setup information. (When the Trekking command is used)
→
If the specified number of colors is fewer than 256 in the display setting, the bit map
is not displayed correctly, but the setup information can be displayed correctly.
The Point to Point tunneling protocol cannot be set.
→
The protocol is not supported at present. After installation, set the protocol through
Control Panel. In this case, rebooting is not necessary.
The details of a network adapter cannot be set.
→
Configuration Diskette Creator is unable to set the details of network adapters. Start
Windows, and set the details through Control Panel.