NEC Express5800/320Fd-MR, Руководство пользователя

Страница: 69 / 484

3-2 Windows Setup and Operation
DISK OPERATIONS
This section explains the disk operation by the RDR (Rapid Disk Resync) function.
NEC Express5800/ft series duplicates disks to secure data by using “Rapid Disk Resync (RDR)
function”. This section describes operations such as configuration of dual settings to disks and
replacement of disks.
IMPORTANT:
On the disks containing OS, do not create a partition other than the system partition,
Create a data disk partition after configuring the RDR.
Disk Operations Using the RDR (Rapid Disk Resync)
Function
RDR (Rapid Disk Resync)
RDR function of ft control software secures reliability by making disks duplexed per disk.
Duplexing disks by the RDR function enables the disks to be resynchronized in a short period of
time when their mirror has been broken due to causes such as PCI module replacement.
Setting RDR to disks duplicates the disks of paired slots as shown in the figure below and Windows
(ex. Disk Management and Device Manager) recognizes paired disks as a single virtual disk.
[Corresponding slots]
Corresponding slots
PCI module 0 Slot 1
Ù
PCI module 1 Slot 1
PCI module 0 Slot 2
Ù
PCI module 1 Slot 2
PCI module 0 Slot 3
Ù
PCI module 1 Slot 3
Note:
In the above table, the PCI module names correspond to the following modules:
PCI module (for CPU/IO module 0): PCI module 0
PCI module (for CPU/IO module 1): PCI module 1
Slot 3
Slot 2
Slot 1
Slots corresponding to the mirroring process
Slot 3
Slot 2
Slot 1