NEC Express5800/320Fd-MR, Руководство пользователя

Страница: 398 / 484

Troubleshooting 7-7
On-screen error message Cause Action
0BA0 SDR/PIA mismatched.
SDR, PIA must be
updated.
SDR and PIA data do not
match. If updating SDR/PIA does not
solve the issue, replace ft Remote
Management Card. In the case
ft Remote Management Card is
not mounted, or in the case the
failure still remains after replacing
the card, replace CPU/IO module.
0BB0 SMBIOS - SROM data
read error
•
I2C bus is faulty.
•
SROM is faulty.
•
BMC is faulty.
0BB1 SMBIOS - SROM data
checksum bad
Data within SROM is faulty.
If turning AC power off and on
does not help, replace the system
backboard.
0BC0 POST detected startup
failure of 1st Processor
CPU is faulty.
0BC1 POST detected startup
failure of 2nd Processor
Replace the CPU.
8100 Memory Error detected
in DIMM group #1
DIMM is faulty.
Replace the DIMM Slot0 (2
DIMMs).
8101 Memory Error detected
in DIMM group #2
DIMM is faulty. Replace the DIMM Slot1 (2
DIMMs).
8102 Memory Error detected
in DIMM group #3
DIMM is faulty. Replace the DIMM Slot3 (2
DIMMs).
8120 Unsupported DIMM
detected in DIMM group
#1
8121 Unsupported DIMM
detected in DIMM group
#2
8122 Unsupported DIMM
detected in DIMM group
#3
Unsupported DIMM is
mounted.
8130 Mismatch DIMM
detected in DIMM
group#1
8131 Mismatch DIMM
detected in DIMM
group#2
8132 Mismatch DIMM
detected in DIMM
group#3
DIMM group do not match.
Check supported DIMMs and
replace them. If replacing the
DIMMs does not help, replace the
CPU/IO module.
8150 NVRAM Cleared By
Jumper
CMOS clear jumper is
mounted.
8151 Password Cleared By
Jumper
Password clear jumper is
mounted.
Turn off the DC power and
change back the jumper setting.
8160 Mismatch Processor
Speed detected on
Processor 1
8161 Mismatch Processor
Speed detected on
Processor 2
CPU frequency does not
match. Check supported CPUs and
replace them. If replacing the
CPU does not help, replace
CPU/IO module.