NEC Express5800/320Fd-MR, Руководство пользователя

Страница: 146 / 484

4-40 System Configuration
PHY Configuration
The following screen is displayed when “PHY Configuration” is selected in the menu.
See the following table for each item
Item Parameter Description
PHY Rate [Auto]
1.5
3.0 Data transfer rate between SAS controller and devices. The
initial value is set to [Auto]. SAS card adjusts the rate if
necessary.
SAS Address 0-F Specifies the last digit of a 64-bit SAS address of the SAS
controller, device, and each port using a globally unique
worldwide name (WWN) identifier.
[ ]: factory default
1. Press
F6
to return to the initial value.
2. To quit, press
Esc
until you see the closing message (If any changes have been made, the
massage asking you whether or not to save the changes is displayed.).
3. When the closing message is displayed, select [Yes] to quit SerialSelect Utility and restart the
system by pressing any key. The changes made in SerialSelect Utility are enabled after the
system is restarted.
SAS Port ID #0 #1 #2 #3 #4 #5 #6 #7
PHY Rate (Gb/s) ...............
Auto Auto Auto Auto Auto Auto Auto Auto
SAS Address ...50030130F0B13700 0 0 0 0 0 0 0 0
SAS Device Configuration
<F6> - Reset to Defaults