3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
86
Chapter 1 Installing OS
(3) Data Disk Dual Configuration Procedure
Follow the procedure below to configure dual data disk for the slots 1 to 7.
Note
The following shows how to configure dual disk for the slot 1. If you want to configure the
dual disk for slot 2 to slot 7, read "slot 1" as the slots you want to make dual configuration
and perform the procedure.
1. Insert a disk for the dual configuration into the slot 1 of PCI Module 10.
If a disk is already mounted, this procedure is not necessary. Go to step 4.
2. From
Start
, select
Control Panel
,
Administrative Tools
and start
Computer Management
. On the
tree in the left pane, click
Disk Management
.
If the inserted disk is indicated as
Not Initialized
in the right pane, right-click the disk and initialize it.
Important
•
When a disk is inserted or initialized, a popup window asking for rebooting the
system may be displayed, but there is no need to reboot it. Select Restart Later
and close the popup window.
•
Disk may become offline when RDR is set. In this case, use "Disk Management"
to make it online.
3. From
Start
, select
All Programs
then
RDR
and click
RDR Utility
to start RDR Utility.
