3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
70
Chapter 1 Installing OS
3.8
Setup Various Software
3.8.1
Applying ft Server Control Software Update Module
If you use ft Server Control Software UPDATE media, refer to the installation procedure enclosed in the
UPDATE media to apply the update.
Note
Be sure to disable OS Boot Monitoring feature before updating ft Server Control
Software according to
Chapter 1 (3.1.3 Disabling OS Boot Monitoring Feature)
.
In addition, disconnect all the network cables from the server before starting update.
Upon completion of update, set OS Boot Monitoring feature to
Enabled
.
If ft Server Control Software is updated in dual LAN configuration, the name of team is
deleted from display name of LAN card. It does not affect system operation, however, if
you want to return them to original state, remove the team and create it again.
When you update ft Server Control Software in the state of non-activating the LAN port
which is not used, the LAN port is activated after updating. You need to make the LAN
port to non-activation state again.
3.8.2
Applying Security Patches and QFE
When you use the server for the first time, apply the QFE for knowledge information listed below, for stable
operation of your server. You can obtain these QFEs from Microsoft web site. If KB2534366 is already applied in
Chapter 1 (3.7 Applying Service Pack), it is not necessary to apply KB2528507.
KB2471472
An NDIS device cannot be failed over on a fault-tolerant system that is running Windows 7 or Windows
Server 2008 R2 after you remove another NDIS device.
(http://support.microsoft.com/kb/2471472)
KB2528507
Fails to collect memory dump in Windows 7 (x64) or Windows Server 2008 R2 SP1 environment.
(http://support.microsoft.com/kb/2528507)
Note that KB2528507 must be applied on the system where Windows Server 2008 R2 Service Pack 1 has
already been applied.
The QFEs listed below contains the infomation of KB2528507, therefore, if you apply any of these QFEs,
you need not to apply KB2528507 furthermore.
KB2534366, KB2556532, KB2633171, KB2724197, KB2799494, KB2813170, KB2859537, KB2872339
KB2528984
Functionality issues on USB devices that are connected to a Windows 7-based computer on an Intel
platform
(http://support.microsoft.com/kb/2528984)
Refer to Microsoft knowledge base for details of QFE. These QFEs may be included in the other update
programs in future. If such a program is already applied, you need not to apply these programs.
When applying security patches and QFE, there is no restriction specific to ft Server is imposed. Apply patches
according to your system environment.
Important
As for Windows service pack, use only the one provided with the server. Do not
apply any other service pack.
