1. Bundled Software for the Server
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
169
Chapter 2 Installing Bundled Software
(7) Finishing the Upgrade
To complete the Active Upgrade process and clean up ftServer system resources after committing or aborting
an upgrade, click
Finish
on the
Commit Upgrade
page or
Abort Upgrade
page.
When the process completes, the upgrade state is
Fault Tolerant\Idle\Ready
.
If the finish process fails the first time, you can click
Retry
to try again. If the problem persists, refer to
Chapter 1
(8. Troubleshooting)
in
Maintenance Guide
for information about resolving the problem.
On the
Finish
page, upon successful completion of the Active Upgrade process, you can:
•
Click
Exit
to close the Active Upgrade Console.
•
Click
Save Log
to save the activity log to a file.
•
Click
Active Upgrade
in the navigation bar to initiate another readiness test and upgrade with the same
configuration.
•
Click
Configuration
in the navigation bar to create, edit, or load another configuration file.
Important Though the Active Upgrade process is complete, your RDR disks continue to
resynchronize in the background. If you intend to initiate another upgrade process,
you must wait for the resynchronization to complete before you do so. Refer to
Chapter 1 (8.11
(4) Verifying If RDR Disks Are Resynchronizing
) in
Maintenance
Guide
for more information.