NEC DX2000, Руководство по обслуживанию

Страница: 70 / 132

7. Server Management Utility
Scalable Modular Server DX2000 Maintenance Guide
70
Chapter 1 Maintenance
Install
7.1.2
Copy the “Server Management Utility” from “applications/Util” folder of DX2000 Utility Disk to server
management terminal.
Then, add appropriate owner and execution authority to “Server Management Utility” to be run by the root user.
Example)
Install(Copy) it in /opt/mng directory at the mounting point (/mnt) of the DX2000 Utility Disk(DVD-ROM) on the
server management terminal.
# mkdir /opt/mng
# cp /mnt/applications/util/mng_util /opt/mng
# chown root:root /opt/mng/mng_util
# chmod u+x /opt/mng/ mng_util
# cd /opt/mng
Starting the management utility
7.1.3
After installing the management utility, execute the mng_util command at the installation directory and start the
management utility. When executing the mng_util command, specify the username and password that has the
permission to access CSC modules and server modules.
If the username and password are omitted, default settings (username: Mainge; password; Mainte) is used.
Command Table
7.1.4
Commands used in Management Utility is listed below. The detail of each command is described in the
following pages.
Command Function
search Searches each module
slotlist Displays implemented modules
niclist Displays IP/MAC address
frulist Displays FRU/GUID
uidon Turns on UID LED
uidoff Turns off UID LED
saveist Creates MAC address list
quit Quits the management utility
> ./mng_util -U
username
–P
password
mng_util version 01.01
>