NEC DX2000, Руководство по обслуживанию

Страница: 120 / 132

1. POST Error Message
Scalable Modular Server DX2000 Maintenance Guide
120
Chapter 3 Appendix
(2)
Error messages on the virtual LCD
You can check error messages on the virtual LCD displayed in the Web browser of EXPRESSSCOPE engine 3. See
“EXPRESSSCOPE Engine 3 User’s guide” for the virtual LCD.
The table below shows error messages, meaning and actions.
(1/2)
BIOS message displayed
on the top of LCD
Cause Action
XX POST Started Displayed during POST
“XX” indicates the POST code in
execution. Not an error
XX BIOS Rev YYYY Displayed during POST“XX” indicates the
POST code in execution. ”YYYY”
indicates the version of the system
BIOS.
POST Completed
Successfully POST is successfully completed.
POST ERROR XXXX Error XXXX was detected during POST. Check the error message displayed on LCD
and take an action.
No Available Memory in
System No available memory is implemented. Check if memory is correctly implemented.
Error Pause in POST An error was detected during POST.
POST paused. Check the error message displayed on the
screen and take an action.
Entering BIOS SETUP
MENU Starting BIOS SETUP MENU This is not an error. This message
disappears when the SETUP operation
finishes.
BIOS message displayed on
the top of LCD