NEC DX2000, Руководство по обслуживанию

Страница: 24 / 132

5. Resetting and turning off the power forcibly
Scalable Modular Server DX2000 Maintenance Guide
24
Chapter 1 Maintenance
5.2
Forced Shutdown
Continue to hold POWER Switch of the server for at least four seconds. The power is then forcibly turned off.
(To turn on the power back again, wait for at least 30 seconds after turning off the power).
Forced shutdown includes turning off the power of the server module and DX2000.
Server module
Hold down the Power switch of the server module at least 4 seconds to forcibly turn off the power of the server
module.
Use this function when an OS command does not shut down the server, the POWER Switch does not turn off
the server, or software reset does not work.
Note
If the remote power-on function is used, cycle the power once to load the OS after
the power has been forcibly turned off, and then turn off the power again by
shutting down the OS.
DX2000
Hold down the Power switch on the front panel at least eight seconds to forcibly turn off the power of
DX2000. This turns off the power of all modules regardless of the operating status of the internal server
module. The data in the progress may be lost as the top priority is given to the power-off process. Do not use
the feature except in emergency.
Power switch (Press it at
least 4 seconds.
POWER switch
(Keep pressing for at least
eight seconds)