NEC DX2000, Руководство по обслуживанию

Страница: 35 / 132

6. System Diagnostic Tool
Scalable Modular Server DX2000 Maintenance Guide
35
Chapter 1 Maintenance
5. To collect log, set a USB memory (FAT format) to the USB hub and enter “log save all”.
6. Select a USB memory from the list of log storage devices. Enter a destination folder name to save the
log under the input folder. The management tool prompt “MNG PC>” appears on completion of saving.
It takes several minutes until the log have been saved if multiple server modules are loaded.
In the following example, the log is saved in the log2015 folder of the USB memory (1).
* The log file is saved in the tar.gz format. Extract it to check the content.
MNG PC> list 23
Please wait a moment....
CPU Board 023 List
+----+-+---------------------------------+----------------+----+-------------+
| Num|*| Device List | Type |Prev| Status |
+----+-+---------------------------------+----------------+----+-------------+
| 1|*| MEMORY |MEMORY | |normal end |
| 2|*| CPU |CPU | |normal end |
| 3|!|-SATA |SATA | | |
| 4|*| HDD Slot0(TOSHIBA THNSNJ256G8NU|HDD-INT | |fail |
| 5|!|-NIC |NIC | | |
| 6| | Port1(eth0) |LOM-PORT | | |
| 7| | Port2(eth1) |LOM-PORT | | |
| 8|*| SENSOR(TEMPERATURE) |TEMPERATURE | |normal end |
| 9|*| SENSOR(VOLTAGE) |VOLTAGE | |normal end |
| 10|!| LED |LED | | |
+----+-+---------------------------------+----------------+----+-------------+
MNG PC>
MNG PC> log save all
Select the device to save log.
1: USB Flash Disk
Enter selection [1]:
Enter selection [1]: 1
Enter directory name [/]: log2015
Please wait a moment..................................................
Now saving...
All logs have been saved.
MNG PC>