1. Transfer, Movement, and Disposal
Scalable Modular Server DX2000 Maintenance Guide
14
Chapter 1 Maintenance
CAUTION
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to
Safety precautions
in
Precautions for Use
in
User’s Guide.
•
Make sure to complete installation.
•
Do not get your fingers caught.
•
Be careful of handling internal components that may be at high temperatures.
Note
•
If the server needs to be relocated or stored due to a change in the floor
layout to a great extent, contact your sales representative.
•
If the server has hard disk drives, move the server while being careful not to
damage the drive.
•
When storing the server, monitor the environmental conditions of the storage
area (temperature:
−
10
°
C to 55
°
C, humidity: 20% to 80%). (No dew
condensation is permitted)
Tips
Make backup copies of important data stored in the hard disk drives.
1. Shut down all the server modules installed in this server.
2. Unplug the power cord of the server from the power outlet.
3. Confirm that the POWER LED is off.
4. Disconnect all the cables from the server.
Pull out the server from the rack slowly, withthree or more people. For the procedure, refer to
Chapter 2
,
Installation and Connection
in
DX2000 User’s Guide
.
5. Pack the server securely to protect from damage, shock, and vibration.
Important If this server is suddenly moved from a cold place to a warm place,
condensation will occur and cause malfunctions and failures when the
server is used in such a state. Wait for a sufficient period of time before
using the server in the operating environment.
Note
•
Check and adjust the system clock before operating after relocating or storing
the server.
•
If the system clock time is significantly delayed or advanced over time in spite of
adjustment, contact your sales representative.
Содержание DX2000
Страница 131: ... MEMO ...
