NEC DX2000, Руководство по обслуживанию

Страница: 72 / 132

7. Server Management Utility
Scalable Modular Server DX2000 Maintenance Guide
72
Chapter 1 Maintenance
2 ． Specifying a LAN segment of the server management terminal
Search network segment of the server management terminal for BMC of CSC modules and server
modules to display information. IP addresses and MAC addresses of the LAN for the modules that were
found are grouped by chassis.
[Format] search OWN
Example: When IP address is set to 192.168.0.15 and subnet mask 255.255.255.0 in the server
management terminal, the modules are searched in the range of 192.168.0.0 to 192.168.0.255.
Note:
When many valid IP addresses are contained in the search range, there is a possibility that the target CSC
modules or server modules may not be found. In such a case, change the settings in the server
management terminal to set the sufficient value for the maximum number of ARP cache entries for the
server management terminal.
> search OWN
Chassis serial : 123456789012
Board ManagementLAN MAC IP DataLAN1 MAC DataLAN2 MAC
----------- ----------------- --------------- ----------------- -----------------
CSC 94:DE:80:AB:01:91 192.168.0.1
LAN-SW1 94:DE:80:AB:02:A8 192.168.0.2
LAN-SW2 94:DE:80:AB:02:A9 192.168.0.3
CPU Board1 94:DE:80:AB:00:34 192.168.0.11 94:DE:80:AB:03:D2 94:DE:80:AB:03:D3
CPU Board2 94:DE:80:AB:00:35 192.168.0.12 94:DE:80:AB:03:D4 94:DE:80:AB:03:D5
CPU Board3 94:DE:80:AB:00:36 192.168.0.13 94:DE:80:AB:03:D6 94:DE:80:AB:03:D7
CPU Board4 94:DE:80:AB:00:37 192.168.0.14 94:DE:80:AB:03:D8 94:DE:80:AB:03:D9