NEC DX2000, Руководство по обслуживанию

Страница: 56 / 132

6. System Diagnostic Tool
Scalable Modular Server DX2000 Maintenance Guide
56
Chapter 1 Maintenance
***********************************************
Are you sure you want to execute the test?
***********************************************
1: Execute
2: Cancel
Enter selection [Execute]:
Checking the device configuration information
6.2.3
Display the device configuration information screen before diagnosing the system.
The screen displays the information about the system processor, hard disk drive, removable media, PCI card
and the number of power units.
Check that the device configuration is correct and that there is no unrecognized device.
Device confoguration information screen
System diagnosis
6.2.4
Decide whether or not to undertake system diagnostic evaluation.
Select “Execute” to execute system diagnosis. Then, move on to step 1.
Select “Cancel” to ignore system diagnosis. Then, move on to “Chapter 1 (6.2.5 Saving log)”.
System diagnostic execution screen
****************************************************
Please confirm the devices.
****************************************************
------------------------------
CPU Information
==============================
CPU : Genuine Intel(R) CPU @ 2.10GHz, 4(4)Cores
------------------------------
Memory Information
==============================
Memory RAS Mode : Independent
Memory Capacity : 8 GB
------------------------------
Option Board Information
==============================
SATA : LynxPoint 6-port SATA Controller 1 (AHCI mode)
:
:
:
Press enter key to continue.