NEC DX2000, Руководство по обслуживанию

Страница: 36 / 132

6. System Diagnostic Tool
Scalable Modular Server DX2000 Maintenance Guide
36
Chapter 1 Maintenance
7. The following command shuts down all server modules.
Important If you shut down the server after halting the diagnosis test by the "stop"
command without checking status, Segmentation Fault may occur
depending on the timing and the shutdown process may fail. In such cased,
turn off the server forcibly by using the following command.
MNG PC> shutdown -f all
8. Enter “list” at the management tool prompt “MNG PC>” and check that all server modules are turned
OFF.
9. On the top of the screen, select “System”- >”Shut Down…” and press the “Shut Down” button in the
displayed dialog box to shut down the system.
When you restart the system, note that the system diagnostic management tool may not find server
modules.
10. Pull out the AC cable.
MNG PC> shutdown all
MNG PC>
MNG PC> list
Module List Power Type Status
+----------------+----------+----------+----------+
CSC ON TP PASS
CPU Board1 ON MNG PC
CPU Board2 OFF
CPU Board3 OFF
:
CPU Board43 OFF
CPU Board44 OFF
+----------------+----------+----------+----------+
CSC : 1 CPU : 43 + MNG PC
PASS: 1 PASS: 0
FAIL: 0 FAIL: 0
MNG PC>
MNG PC> shutdown -fall