Falcon II Outdoor series printers – Maintenance Manual
81
AP-74065, Rev. 1.0, 21/11/03
4.5.4. Replacing the PF deceleration belt
Notes :
¾
Remove following covers before replacing the parts in the PF motor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Media guide F: refer to "Removing media guide F"
Step 1 :
Follow the instructions in "Replacing the PF motor assembly" to remove the PF motor.
Step 2 :
Follow the instructions in "Replacing the PF_ENC assembly and PF scale assembly" to remove the PF_ENC
assembly and the PF scale assembly.
Step 3 :
Replace the PF deceleration belt.
1 = PF deceleration belt
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
Step 5 :
Adjust the tension of the PF deceleration belt according to "PF deceleration belt tension adjustment".
