Falcon II Outdoor series printers – Maintenance Manual
122
AP-74065, Rev. 1.0, 21/11/03
Step 6 :
Apply the screw lock to the cursor axis, and install the cursor roller assembly with the axis at the lower position.
Notes :
¾
Be sure that the screw lock does not contaminate the cursor roller or the spacer.
1 = Applying position of the screw lock
Step 7 :
Perform head height adjustment according to "Head height adjustment".
4.8. REPLACING THE MAINTENANCE AREA
4.8.1. Replacing the maintenance assembly
Notes :
¾
When replacing the parts inside the maintenance assembly, be sure to perform
following operation to clear the counter.
"High ink initialization" or " Cleaning initialization": refer to "Counter Display
Menu"
¾
Remove following covers before replacing the parts inside the maintenance
assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Step 1 :
Follow step 1 in "Replacing the flushing box assembly" to move the CR cursor to the left.
Step 2 :
Remove the 4 screws fixing the side plate T.
