Falcon II Outdoor series printers – Maintenance Manual
147
AP-74065, Rev. 1.0, 21/11/03
5. SELF-DIAGNOSIS FUNCTION
5.1. INTRODUCTION
This chapter provides information on the self-diagnosis function.
The self-diagnosis function adjusts the printing accuracy. It is used in the manufacturing process, adjustment and
maintenance.
The self-diagnosis function is implemented in the system firmware. All functions are available from the operation panel.
Notes :
¾
Refer to “Part names and functions ".
5.2. PREPARATION
Before you can use the self-diagnosis function, you should make the machine ready and display the self-diagnosis menu.
5.2.1. Preparations on Machine
Before starting up the self-diagnosis function, perform following preparations:
(1) Setting printing media
Set a roll media for adjustment.
Notes :
¾
In the self-diagnostic mode, pressing the [ENTER] key in the Diagnosis menu
moves the lever up and down.
¾
In the self-diagnostic mode, pressing the [CANCEL] key in the Diagnosis menu cuts
the media.
¾
When the self-diagnosis menu has been displayed, roll media is automatically set as
the type of media.
¾
Make sure to use double vinyl media for the adjustment purpose.
