Falcon II Outdoor series printers – Maintenance Manual
210
AP-74065, Rev. 1.0, 21/11/03
5.9.10. Endurance Running Check Menu
In this menu, you can confirm the number of endurance running cycles that have been already finished.
The number of endurance running cycles is stored in NVRAM in the system. Therefore, even if a serious error occurs
during endurance running, you can confirm the number of finished cycles just before the occurrence of the serious error.
* Check *
CR Motor
50 Number of endurance running cycles (CR Motor)
PF Motor
0 Number of endurance running cycles (PF Motor)
(1/5)
* Check *
Cutter
33 Number of endurance running cycles (Cutter)
Head U/D
55 Number of endurance running cycles (Head
(2/5) up/down)
* Check *
Head lock
77 Number of endurance running cycles (head lock)
Wiper
77 Number of endurance running cycles (wiper)
(3/5)
* Check *
Pump
77 Number of endurance running cycles (pump mot)
Lever Motor
77 Number of endurance running cycles (sequential
(4/5) Printing)
* Check *
Nozzle
77
Total Life
88 Number of endurance running cycles (All)
(5/5)
