Falcon II Outdoor series printers – Maintenance Manual
50
AP-74065, Rev. 1.0, 21/11/03
4.2.9. Removing rear paper guide
Step 1 :
Remove side cover L.
Step 2 :
Remove side cover R.
Step 3 :
Remove the front cover.
Step 4 :
Remove the Y rail cover.
Step 1 :
Remove the screws from the top of the rear media guide.
Notes :
¾
Please note that the amount of screws is size dependent.
1 = Screws on the rear paper guide
Step 2 :
Remove the screws from the rear of rear paper guide.
Notes :
¾
Please note that the amount of screws is size dependent.
Step 3 :
Standing at the rear of the unit move the rear paper guide towards you.
Step 4 :
Loosen the cables from their cable clamps.
Step 5 :
Carefully loosen the connectors
