Falcon II Outdoor series printers – Maintenance Manual
30
AP-74065, Rev. 1.0, 21/11/03
3.4. INSTALLATION
The Installation of the unit is explained below.
3.4.1. Conditions of the installation environment
Important :
¾
Do not place the printer in following areas. Doing so may result
in the printer falling over and causing injury.
Unstable surfaces
Slanted place
Where vibration of other machines is transmitted.
¾
Do not sit on the printer or put heavy things on the printer.
Doing so may cause the printer to fall and injure people.
¾
Do not cover the ventilation hole of the printer with cloth, such
as a blanket or table cloth. Doing so could obstruct ventilation
and cause fire.
¾
Do not place the printer in humid and dusty areas. Doing so may
result in electrical shock or fire.
(1) Conditions of the installation environment
Select the place to install this unit according to the environmental condition in the table below.
50” model
11.7 m² or larger. Frontage of 4.3 m or greater.
64” model
12.7 m² or larger. Frontage of 4.7 m or greater.
Area
87” model
14.3 m² or larger. Frontage of 5.3 m or greater.
Floor loading capability
2490Pa (300kg/m²) or over
Voltage
AC100V - 120V or AC220V – 240V
Frequency 50/60Hz±1Hz
Electrical
Capacity
AC100V - 120V: 3A or more
AC220V - 240V: 1.5A or more
Recommended
working environment
Temperature: 25°C
Humidity: 40% to 60%, without condensation
Operational conditions
Temperature: 18°C to 35°C
Humidity: 40% to 60%, without condensation
Rate of change
Temperature: No more than 2°C per hour
Humidity: No more than 5% per hour
Environmental
Storage environment
Temperature: -20°C to 60°C
Humidity: 5 to 85%, without condensation (When ink has been
discharged.)
