Falcon II Outdoor series printers – Maintenance Manual
319
AP-74065, Rev. 1.0, 21/11/03
(12) The ink tube
may be damaged.
• Replace the ink
tube.
→
Replacing the
steel bearer, tube
guide, CR tape
power cable and ink
tube.
(13) The CR board
may have a
problem.
• Replace the CR
board assembly.
→
Replacing the CR
board assembly.
(14) The Mainboard
assembly may have
a problem.
• Replace the
Mainboard
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
16
Mixed colour lines do not
overlap.
(1) Check if the
tension of the steel
belt is properly
adjusted.
• Adjust the steel
belt tension.
→
Steel belt tension
adjustment
17
The positions of black and
colours are not aligned.
(2) Check the head
inclination and
height adjustments.
• Adjust the
inclination and
height of the head.
→
Head precision
adjustment
(3) Check the two-
way printing position
alignment for
problems.
• Adjust the two-way
printing position
alignment.
→
Repeatability
alignment menu
(4) Check if CW
adjustments are
made correctly.
• Perform the CW
adjustments.
→
CW adjustment
menu
(5) Check if the QR
code is input
correctly.
• Input the correct
QR codes.
→
Head rank input
menu
(6) Make sure that
the CR_ENC
assembly and the T
fence are not
interfering.
• If they are
interfering with each
other, adjust the
installation positions
of the CR_ENC
assembly and the T
fence.
• If the adjustments
do not improve this,
replace the
CR_ENC assembly
and the T fence.
→
Replacing the T
fence.
→
Replacing the
CR_ENC assembly.
(7) The head
assembly may be
damaged.
• Replace the
damaged head
assembly.
→
Replacing the
print head assembly
and head tape
power cable.
18
A limited line in the head travel
direction is not accurate (in the
main scanning direction)
(1) Check if the use
conditions are within
the normal
operation
conditions.
• be sure to use the
product under the
operation
conditions.
-
