Falcon II Outdoor series printers – Maintenance Manual
66
AP-74065, Rev. 1.0, 21/11/03
Step 13 :
Stick (with silicone glue) the two press plates onto the heater strip.
¾
50” model : X = 380 mm
¾
64” model : X = 380 mm / Y = 1060 mm
¾
87” model : X = 660 mm / Y = 1200 mm / Z = 1750 mm
Notes :
¾
It will take ± 1 hour to let the glue dry.
Step 14 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾
During reinstallation of the plate, make sure there are no cables stuck.
