Falcon II Outdoor series printers – Maintenance Manual
315
AP-74065, Rev. 1.0, 21/11/03
(6) If the paper in
concern is roll
paper, check if the
scroller is rotating
smoothly.
• Make sure the
scroller receivers
are installed in the
correct position.
• Replace the rollers
of the scroller.
→
Replacing the
scroller R assembly.
→
Replacing the
scroller L assembly.
(7) Make sure hat
the PF belt tension
is adjusted correctly.
• Adjust the tension
of the PF reduction
belt.
→
PF deceleration
belt tension
adjustment.
(8) Check if the
pump is running
during the cleaning
operation.
• Check that the
connections of
Mainboard
connectors J160-
J161 are good.
• Replace the pump
motor.
• Replace the
Mainboard
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
→
Replacing the
pump motor
assembly.
(9) Check if he
nozzle face is wiped
correctly.
• Using the wiper,
wipe the nozzle face
well.
→
User’s Guide
(10) Check the
cleaning wipers for
contamination.
• Using the provided
cleaning cloth for
cleaning the wipers,
slightly dampen it
with cleaning liquid
and wipe the
surface of the
cleaning wipers,
then recheck their
condition by
performing the
cleaning operation.
• If the ink is solid
and does not come
off by wiping,
replace the wiper.
→
User’s Guide
→
Replacing the
cleaner
(11) Check the T
fence for
contamination
• Clean the T fence.
• If contamination
cannot be cleaned
up, replace the T
fence
→
Replacing the
fence
(12) Check the
rotation of the
pressure roller with
the pressure arm at
the raised position.
• If the surrounding
area of the pressure
roller is
contaminated by
paper dust and
waste paper, wipe it
with a soft
dampened cloth.
→
User’s Guide
(13) Check if the QR
code is input
correctly.
• Input the correct
QR codes.
→
Head rank input
menu
