Falcon II Outdoor series printers – Maintenance Manual
177
AP-74065, Rev. 1.0, 21/11/03
5.5.8. Top & bottom adjustment menu
Sets printing margins.
Make adjustments following the steps below.
Step 1 :
Set media as necessary.
Step 2 :
After the media has been set, pattern printing with band feed compensation and media cutting are performed.
The following is the description of the printing method.
¾
Black, one path, one-way
Step 3 :
Measure the following adjustment items for the results of the printing of the top & bottom adjustment pattern.
Measurements are carried out at the center of the media. The adjustment items are as follows.
¾
Top
distance
¾
Bottom
distance
¾
Side
margin
1: Top distance
2: Bottom distance
3: Side margin
4: Media feed direction
Step 4 :
Input each measurement as a parameter.
