8 DenEdit Settings
78
Rev. 02/2019
8.8.1
Tab: Mode
Analysed channels
Activate the checkboxes of the detonation sensors that you want displayed in the tabs
Actual
knocking value
and
Knocking history
. If the display of a sensor is deactivated, the signal of the
detonation sensor still continues to be monitored.
Sound recording
If the device is connected to the running engine, you can make sound recordings of the signal of
a detonation sensor. This is generally executed by MOTORTECH service personnel and should
only be performed upon their request.
Proceed as follows:
1.
Set the desired detonation sensor in the field
Selected sensor
.
2.
Then click on the button
Record sound file
.
▸
An input window opens.
3.
Select a save location for the sound file (*.au) and enter a filename.
▸
The sound recording starts and is shown graphically in a separate window.
4.
Click on
Stop
to stop the recording.
Display
You can select which value is displayed in the knocking intensity pointer instrument via the
following settings:
–
Minimal knocking value
The sensor with the lowest knocking intensity is automatically selected and displayed.
–
Maximal knocking value
The sensor with the highest knocking intensity is automatically selected and displayed.
–
Analysed cylinder
You can specify the cylinder whose knocking intensity should be displayed. The number
entered corresponds to the position of the desired cylinder in the firing order (e.g.
2
for the
second cylinder in the firing order).
Содержание DetCon series
