Motortech DetCon series, Руководство по эксплуатации

Страница: 59 / 90

6 Wiring of the Device
Rev. 02/2019 59
The connection between DetCon and the ignition controllers with ASO output is established as
follows:
DetCon other equipment DetCon
MIC850 connection MIC3, MIC4, MIC5, MIC6 connection
Configuration of the ignition controller
In the configuration software (MICT) for the MOTORTECH ignition controllers
with ASO output, the adjustments for the DetCon can be easily made using
the button
Configuration for DetCon2/20
. This can be found on the
configuration page
Input/Outputs – ASO1 (auxiliary synchronization
output)
. Further information can be found in the operating manual of your
ignition controller.