Motortech DetCon series, Руководство по эксплуатации

Страница: 41 / 90

41 Rev. 02/2019
Unpack the equipment, taking care not to damage it, and ensure that the operating manual is
always stored with the equipment and is easily accessible. Check the contents for completeness
and verify that the device type meets your application requirements.
Scope of Supply
The supply scope of the device consists of the following components:
– DetCon detonation controller
– CD-ROM with software for configuring the device
– USB interface lead for connecting the device to a PC/laptop
– Operating Manual
– additionally provided for the model with enclosure: screw set and screw joints
Installation locations where strong vibrations or ambient temperatures of below –40 °C (–40 °F)
or above +70 °C (+158 °F) are present are not permissible and result in the warranty being
voided.
Danger of explosion!
In order to prevent the connection terminals from falling out or loosening,
brackets must be mounted on the DetCon detonation controller in
potentially explosive areas which are screwed over the connection
terminals before commissioning and thus fix them in place. There is a
danger of sparking.
Danger of explosion!
The device may only be installed and operated in hazardous areas in an
environment that ensures pollution degree 2 (or better, danger of leakage
currents) according to IEC/EN 60664-1. There is a danger of sparking
Danger of explosion!
Do not disconnect connections as long as the circuit is active unless the
environment is classified as non-explosive. Refer to the operating
instructions for wiring instructions. There is a danger of sparking.
5 Installation Instructions