Motortech DetCon series, Руководство по эксплуатации

Страница: 15 / 90

3 Intended Use
Rev. 02/2019 15
The following diagram and the explanations below it illustrate the basic control process of the
system:
Term used in diagram Description
Knocking Level Example of the progression of knocking energy
IMMEDIATE STOP LIMIT The maximum value at which the engine is stopped
IGNITION REDUCTION LIMIT The maximum value upon which an ignition timing reduction
is performed
ENGINE KNOCKING (binary
output) Signal on the binary output indicating knocking.
LOAD REDUCTION (binary
output) Signal on the binary output effecting load reduction.
TRIP (binary output) Signal on the binary output indicating that the IMMEDIATE
STOP LIMIT has been exceeded or that a faulty sensor has
been detected.
Timing Reduction (analog
output) Curve of the analog signal for timing reduction
MAX. LEVEL OF ANALOG
OUTPUT Maximum value of the timing reduction
Timing Reduction Gain Speed of the timing reduction
Decrease Ramp Speed of the timing reduction
Delay after load reduction Delay time following a load reduction