Moog CURLIN INFUSION PainSmart Скачать руководство пользователя страница 37

Страница: 37 / 141

AC Adaptor/Charger

This accessory becomes the external power source when plugged directly into the

Moog Curlin

Infusion

pump. The AC Adaptor can also be used to recharge the portable battery pack by

plugging the connecting cable into the recharging port on the battery pack.

There are two AC Adaptors:

• The US Domestic AC Adapters 47864 and 57797 have a three-prong plug to be

plugged into a standard three-prong, grounded wall receptacle and a six-foot cable

which plugs into the power outlet on the bottom of the pump. The two-pin connector

plugs into the receptacle by aligning the red dots on each.

• The International AC Adapters 47685 and 58831 available for international use. The

two-pin connector plugs into the receptacle by aligning the key on the connector.

Note:

Pause the pump and then turn it off before connecting the AC Adaptor.

Note:

The connector is keyed with a “notch” at this red-dot location to guide alignment. To

remove, pull back on the locking sleeve to unlock and then pull gently to remove the

connector from the battery pack or pump’s port.

International AC Adaptor

Figure 2.12 Universal AC Adaptor

Two-pin adaptor plugs into port on bottom of the pump for AC power or can be used

to recharge the battery pack by plugging into the recharging port on the battery pack.

To remove, pull back on the locking sleeve.

Содержание CURLIN INFUSION PainSmart














































































































































Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды

Moog CURLIN INFUSION PainSmart, Руководство пользователя

Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды