Moog CURLIN INFUSION PainSmart Скачать руководство пользователя страница 87

Страница: 87 / 141

remainder of the infusion.

Note:

If the screen is not acknowledged with a YES or NO key press, the

Air-In-Line sensitivity will be set to 2 mL when the screen is

cleared (i.e. alarm occurs while screen is displayed).

LCD Display:

***ALERT *** AIR SENSOR HAS BEEN SET TO 2 ML

Alert:

Air-In-Line sensitivity will be set to 2mL

Cause:

NO was pressed at the “AIR SENS OFF. Using In Line Filter?” alert screen.

The Air-In-Line sensitivity will be set to trigger an Air-In-Line alarm if

2mL of air is detected.

Resolution:

If an air eliminating filter is being used, press YES when the “AIR SENS OFF.

Using In Line Filter?” screen is displayed. This will disable air detection as

indicated under “AIR SENS OFF. Using In Line Filter?” alert explanation.

LCD Display:

***ALERT *** AMT NOT 0 OR CURRENT DOSE AMT

Alert:

Unable to change clinician dose while clinician dose in progress

Cause:

A clinician dose is in progress, and a new clinician dose value is entered that is

not 0 or the current dose amount.

Resolution:

If the current clinician dose is to be continued, change the “Clin DOSE”

value

back to the original value and accept the field and menu.

If the current clinician dose is to be terminated, which will allow a new

clinician dose to be programmed, enter a value of 0 in the “Clin DOSE” field

and accept the field and menu. The next time that the Options menu is

accessed a new “Clin DOSE” value can be entered.

LCD Display:

***ALERT *** AMT TBI GREATER THAN BAG VOLUME

Alert:

Value entered is greater than value in “Bag Vol” field.

Cause:

Occurs when the amount the entered for the “Amt TBI” or “Vol TBI” field is

greater than the value in the bag volume field.

Resolution:

Recheck the data entry.

LCD Display:

***ALERT *** AMT TBI GREATER THAN BAG VOLUME. YES to

Continue NO to Return

Alert:

Insufficient volume

Содержание CURLIN INFUSION PainSmart














































































































































Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды

Moog CURLIN INFUSION PainSmart, Руководство пользователя

Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды