Moog CURLIN INFUSION PainSmart Скачать руководство пользователя страница 32

Страница: 32 / 141

The battery pack provides 5.2V with a capacity of 6000 mA-hrs. It is connected to the same

port connector that the AC adaptor uses to power the pump. When the battery pack power is

fully exhausted the pump will automatically revert to the internal C-cell batteries. Having new

C-cell batteries in the pump is crucial to ensure an adequate low battery warning period and to

ensure infusion continuity if the battery pack is accidently disconnected. The red Low Battery

LED on the battery pack will illuminate prior to the external battery running out of power.

The pump will provide at least 30 minutes of audible and visual warning prior to the internal

C-cell batteries running out power.

The battery pack is recharged by connecting it to an AC adaptor. Fully recharging the battery

takes approximately 15 hours. While charging, the LED indicator will be yellow. When the

battery is fully charged, the LED will be green. If a fault is encountered in the battery pack the

LED will either flash yellow or not illuminate.

Warnings

• The external battery pack should be used with new C-cell batteries in the pump to avoid

interruption of the infusion if the cord between the pump and battery pack becomes

disconnected and to ensure proper operation of the pump’s low battery alarm.

• Do not use this battery pack with the

Moog Curlin 340-2022 (POWDEC AC Adaptor

WM10-6.9V)

as the combination may exceed the allowable limits for emitted electromagnetic

interference.

• Battery pack cable utilizes an attached cable. This can be a tripping or chocking hazard, avoid

use that may lead to entanglement around the neck or feet.

Cautions

• This battery pack is fluid resistant, but it is not designed to be water tight. Care should be

taken to avoid any unnecessary contact with water or other fluids. Do not use the battery pack

where it might fall into water.

• The power gauge located on the pump screen (pictured below) does not reflect the remaining

charge in the battery pack. The displayed capacity on the pump will always show empty when

a battery pack (with remaining capacity) is attached (see image below):

Pump & Set F

tur
es

Содержание CURLIN INFUSION PainSmart














































































































































Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды

Moog CURLIN INFUSION PainSmart, Руководство пользователя

Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды