Moog CURLIN INFUSION PainSmart Скачать руководство пользователя страница 67

Страница: 67 / 141

Repeating a Pre-Programmed Library Therapy

REPEAT Rx—Use this feature if an infusion is complete and you wish to repeat the same

prescription over again or if a therapy is programmed and the pump is turned off before the

infusion is started. Select this field by moving the cursor to REPEAT Rx, and press the YES/

ENTER key.

If the pump has been programmed for more than one therapy and you wish to select a therapy

at this time, move the cursor to REPEAT Rx, and press the YES/ENTER key. This action will

take you to the Select Therapy Screen and allow you to choose which of the programs you now

wish to repeat.

Note:

If you are choosing a therapy that is different than the last one selected, Shift Totals and

Hourly Totals will be cleared.

If only one therapy is programmed and REPEAT Rx is selected, the cursor will automatically

advance through the prescription menus. You can stop the auto-advance function by pressing

any key (except ON/OFF) and then complete the confirmation of the prescription by pressing

the YES key at the remaining fields.

Note:

REPEAT Rx

does not allow any changes to the Pre-Prescription Menu.

If changes need

to be made in Pre-Prescription selections (units, concentration, etc.) select New Program

and reenter the entire prescription.

The lock settings affect the use of REPEAT Rx. Lock 1 allows REPEAT with changes to the

prescription screen only. Lock 2 allows REPEAT but does NOT allow the user to make changes

in the prescription. Lock 3 does not allow REPEAT. (See lock setting table).

If a therapy has not completed and the REPEAT Rx function is selected, the following screen

will display:

If the current infusion is to be discontinued and a new IV bag started, press YES/ENTER to

repeat.

If the current infusion is to continue, press NO, and you will be prompted to resume the

therapy.

Содержание CURLIN INFUSION PainSmart














































































































































Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды

Moog CURLIN INFUSION PainSmart, Руководство пользователя

Результаты поиска

Содержание CURLIN INFUSION PainSmart

Отзывы:

Похожие инструкции для CURLIN INFUSION PainSmart

Бренды по названию

Популярные бренды