Microsens MS400870M Series страница 59 Скачать руководство пользователя

Страница: 59 / 170

Read & Write:

Full access right but cannot modify user account & system

information and load factory settings.

Read Only:

Allow to view only.

Access Denied:

Completely forbidden for access.

NOTE:

To prevent incautious operations, a user cannot delete, modify user name and

enable or disable the account states.

4.2.1 RADIUS Configuration

Click

RADIUS Configuration

User Authentication

and then the following screen page

appears.

When

RADIUS Authentication

is enabled, User login will be according to those settings on

the RADIUS server(s).

Note:

For advanced RADIUS Server set

up, please refer to Appendix A or the “free RADIUS

readme.txt” file on the disc provided with this product.

Secret Key:

The word to encrypt data of being sent to RADIUS server.

RADIUS Port:

The RADIUS service port on RADIUS server.

Retry Time:

The number of trying to reconnect if the RADISU server is not reachable.

RADIUS Server Address:

IP address of the first RADIUS server.

2nd RADIUS Server Address:

IP address of the second RADIUS server.

Содержание MS400870M Series











































































































































































Результаты поиска

Содержание MS400870M Series

Отзывы:

Похожие инструкции для MS400870M Series

Бренды по названию

Популярные бренды

Microsens MS400870M Series, Руководство пользователя

Результаты поиска

Содержание MS400870M Series

Отзывы:

Похожие инструкции для MS400870M Series

Бренды по названию

Популярные бренды