Microsens MS400870M Series Скачать руководство пользователя страница 21

Страница: 21 / 170

Company Name:

This

shows the company name or related information.

System Object ID:

This

shows the predefined System OID.

System Contact:

This

shows the system contact information.

System Name:

This shows the system name or related descriptions.

System Location:

This

shows the system location.

Model Name:

This

shows the product model name.

Firmware Version:

This

shows the firmware version of this Managed Switch.

M/B Version:

This shows the motherboard version of this Managed Switch.

Serial Number:

This

shows the serial number of this Managed Switch.

Date Code:

This shows the date code of this Managed Switch.

Up Time:

This shows how long this Managed Switch has been turned on since the last

reboot.

Local Time:

This shows the local time of the device.

Show available commands

In User, Enable and Config mode, you can type

“show”

to view a list of commands

available.

Содержание MS400870M Series











































































































































































Результаты поиска

Содержание MS400870M Series

Отзывы:

Microsens MS400870M Series, Руководство пользователя, Страница: 21 / 170

Результаты поиска

Содержание MS400870M Series

Отзывы: