METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 96 / 127

Radiance 10/100 Mbps Services Line Card
94
Group – identifies the access profile for the SNMPv3 user.
ro – read-only access to non-privileged objects.
rw – read-write access to non-privileged objects.
admin – full read-write access to all objects.
Example :
Console> show snmpuser
User name Auth Protocol Priv Protocol Group
-------------- ----------------- ----------------- --------
v3user MD5 DES rw
Console>
show
snmpv1v2
Description : Display the SNMPv1 and SNMPv2c access state.
Syntax : show snmpv1v2
Display
Parameters
: enabled – SNMPv1 and SNMPv2c access is enabled.
disabled – SNMPv1 and SNMPv2c access is disabled.
Example :
Console> show snmpv1v2
SNMPv1/v2c access: enabled
Console>
show switch
Description : Display the switch forwarding mode and all configured
VLANs. Identify the access port and the trunk port, and
display the default port priority.
Syntax : show switch
Example : Console> show switch
Switch Forwarding mode . . . . . : Transparent
QinQ Mode. . . . . . . . . . . . . . . . : Disabled
Management VLAN . . . . . . . . . : 0
Port 1 VID / Priority . . . . . . . . . : 1 / 0 (Access)
Port 2 VID / Priority . . . . . . . . . : 1 / 0 (Trunk)
User VLAN. . . . . . . . . . . . . . . . : 3
Console>
show
systeminfo
Description : Show MIB-II system group information.
Syntax : show systeminfo
Display
Parameters
: System Name – identifies the MIB-II sysName object.
System Location – identifies the MIB-II sysLocation object.
System Contact – identifies the MIB-II sysContact object.
System Up Time – the length of time the device has been
running since the last reset.