METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 92 / 127

Radiance 10/100 Mbps Services Line Card
90
show radius
Description : Show the RADIUS configuration parameters.
Syntax : show radius
Display
Parameters
: RADIUS Server – IP address of the RADIUS server.
Port – UDP port number.
Status – indicates if the server is the primary RADIUS
server.
Authentication Status – identifies the RADIUS authenti-
cation mode (either enabled or disabled) for the
connected console port and telnet.
RADIUS Retransmissions – Maximum number of trans-
mission retries to a RADIUS server.
RADIUS Timeout – Number of seconds to wait between
attempts to authenticate with a RADIUS server.
Example :
Console> show radius
RADIUS Server Port Status
-------------------- -------------------- --------------------
192.168.1.200 1812 Primary
192.168.1.100 1812
Authentication Status
-----------------------------------------------------------------------
Console Disabled
Telnet Disabled
RADIUS Retransmissions: 2
RADIUS Timeout: 5
Console>
show ratelimit
Description : Show the rate limit settings for the selected port(s).
Syntax : show ratelimit <port number | all>
Parameters : port number – the actual port number.
all – specifies all ports.
Display
Parameters
: Octets Received – number of octets received.
Packets Rcv’d – number of packets received.
Example :
Console> show ratelimit all
Port 1 : ENABLED 8 Mbps (8 Mbps)
Port 2 : DISABLED 100 Mbps (100 Mbps)
Console>
show
rmonportstatistics
Description : Show the RMON Group 1 statistics for the selected port(s).
Syntax : show rmonportstatistics <port number | all>
Parameters : port number – the actual port number.
all – specifies all ports.
Display
Parameters
: Octets Received – number of octets received.