METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 88 / 127

Radiance 10/100 Mbps Services Line Card
86
Dropped Events: 0
Console>
show os
Description : Show the image number and revision of the active
operating system.
Syntax : show os
Example : Console> show os
Active OS image number: 1
OS version 1.4.0 Aug 04 2005 13:58:50
Console>
show port
Description : Show attributes for a selected port or all ports.
Syntax : show port <port number | all>
Parameters : port number – the actual port number.
all – specifies all ports.
Display
Parameters
: Port Type – identifies the Ethernet media designation for
the specified port.
100BASE-X – 100 Mbps fiber optic.
10/100BASE-T – 4 pairs Category 5 UTP.
Connector Type – identifies the connector type for the
specified port.
RJ45 – RJ-45 connector.
SFP – Small Form-Factor Pluggable transceiver with
an LC or SC connector. For the SFP transceiver, the
following parameters are also displayed:
SFP Manufacturer – manufacturer’s name
SFP Part Number – part number assigned by
the manufacturer
SFP Serial Number – serial number assigned
by the manufacturer
SFP Wavelength – wavelength in nanometers
SFP Link Length – maximum distance (in
meters) supported by the transceiver
SFP Diagnostics – indicates whether or not the
SFP supports diagnostics
MAC Address – identifies the MAC address assigned to
the specified port.
The “Port AN” through “Port FEF” parameters display the
administrative settings. If the operational value differs from
the administrative value, the operational value will be
shown in parentheses (). The administrative and opera-
tional values could differ because the setting was changed
but it has not taken effect yet, or because the setting is not
applicable in a particular mode. For the Port State, the link
status is always displayed in parentheses.