METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 58 / 127

Radiance 10/100 Mbps Services Line Card
56
Example :
Console> clear trapdestination 192.168.1.100
Console>
clear username
Description : Remove a user account from the device.
Syntax : clear username <username>
Parameters : username – username.
Example : Console> clear username guest
Console>
clear uservlan
Description : Clear the specified user VLAN ID on both ports.
Syntax : clear uservlan <vlan id>
Parameters : vlan id – VLAN ID in the range 1 to 4094.
Example :
Console> clear uservlan 126
Console>
System Commands
arp
Description : Display the Address Resolution Protocol (ARP) table; or
add or delete an ARP entry. The R821 supports a
maximum of five ARP entries. The maximum number of
static entries is four.
Syntax : arp [all] [delete <IP address>] [static <IP address> <MAC
address>]
Parameters : all – display the ARP table.
delete – delete the ARP entry containing the specified IP
address.
static – add a static entry to the ARP table.
Display
Parameters
: Intf. – Interface number.
IP address – logical IP address.
Physical address – hardware MAC address.
HW – hardware revision.
Proto – protocol type.
State – state of the address resolution process.
RESOLVED – the address has been resolved
successfully.
PENDING – address resolution is in progress, but
has not yet succeeded.
TTL – Time to live in seconds.
permanent – indicates a static entry.
Example : Console> arp all
Intf. IP address Physical address HW Proto State TTL
-----------------------------------------------------------------------------------