METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 87 / 127

85
CLI Commands
ACTIVE – The remote port can initiate monitoring
activities with the local port.
Max PDU Size – indicates largest OAMPDU that the
remote port supports. The remote port exchanges
maximum OAMPDU sizes with the local port, and
both ports negotiate to use the smaller of the two
maximum sizes between them.
Config Revision – indicates the configuration revision of
the remote port as reflected in the latest OAMPDU
sent by the remote port. The configuration revision is
used to indicate configuration changes that have
occurred which might require the local port to re-
evaluate whether peering is allowed.
Supported Functions– identifies OAM functions supported
by the remote port. One or more of the following
functions may be supported:
UNIDIRECTIONAL
LOOPBACK
EVENT
VARIABLE
Example :
Console> show oampeer 2
Port 2 Peer Information:
MAC Address . . . . . . . . : 00:00:00:00:00:00
OUI . . . . . . . . . . . . . . . . : 0 40 9f
Vendor Info. . . . . . . . . . : None
Mode. . . . . . . . . . . . . . . : ACTIVE
Max PDU Size . . . . . . . : 1518
Config Revision . . . . . . : 1
Supported Functions. . . : LOOPBACK
EVENT
Console>
show
oamstatistics
Description : Show show OAM statistics for the specified port (s).
Syntax : show oamstatistics <port number | all>
Parameters : port number – the actual port number.
all – specifies all ports.
Example : Console> show oamstatistics 1
Port 1 Information:
PDU Received: 0
PDU Transmitted: 98
Information Rcv’d: 0 Information Transmitted: 98
Unique Event Notification Rcv’d: 0 Unique Event Notification Transmitted: 0
Duplicate Event Notification Rcv’d: 0 Duplicate Event Notification Transmitted: 0
Loopback Control Rcv’d: 0
Loopback Control Transmitted: 0
Variable Requests Rcv’d: 0 Variable Requests Transmitted: 0
Variable Responses Rcv’d: 0 Variable Responses Transmitted: 0
Org Specific Rcv’d: 0 Org Specific Transmitted: 0
Unsupported Codes Rcv’d: 0 Unsupported Codes Transmitted: 0