METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 72 / 127

Radiance 10/100 Mbps Services Line Card
70
set
radiusauthentication
Description : Enable or disable RADIUS authentication.
Note: This command is not available to telnet users.
Syntax : set radiusauthentication <all | telnet | console> <enable |
disable>
Parameters : all – authenticates all attempts to access the system.
telnet – authenticates access via telnet only.
console – authenticates access only when it is directly
from the connected console port.
enable – enable RADIUS authentication.
disable – disable RADIUS authentication.
Example :
Console> set radiusauthentication all enable
Console>
set
radiusretransmit
Description : Set number of transmission retries to a RADIUS server.
Syntax : set radiusretransmit <count>
Parameters : count – specifies the maximum number of attempts to
send a request to a RADIUS server without receiving
a response. The range is 1-10; the default is 2.
Example : Console> set radiusretransmit 3
Console>
set
radiusserver
Description : Set configuration paramaters for a RADIUS server.
Note: This command is not available to telnet users.
Syntax : set radiusserver <IP address> secret <secret> [port <UDP
port>] [primary]
Parameters : IP address – RADIUS server’s IP address in dotted
decimal notation.
secret – the password (max 65 characters) that has been
assigned to the RADIUS server.
port – the UDP port number. The default is 1812.
primary – indicates that the specified RADIUS server will
be the primary RADIUS server.
Example :
Console> set radiusserver 192.168.2.100 secret mypassword
Console>
set
radiustimeout
Description : Set the time interval (in seconds) between attempts to
authenticate with a RADIUS server.
Syntax : set radiustimeout <time in seconds>
Parameters : time in seconds – time interval (in seconds) to wait for a
reply from a RADIUS server. The range is 1-10; the
default is 5 seconds.
Example :
Console> set radiustimeout 6
Console>