METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 78 / 127

Radiance 10/100 Mbps Services Line Card
76
DHCP Enabled
Retries: 3
DHCP Server: 192.168.1.100
Console>
show download
Description : Show addressing information relative to the download
server used by the download command, along with the
status of the current download.
Syntax : show download
Display
Parameters
: server – identifies IP address of the download host.
filename – identifies the name of the download file.
protocol – identifies the download protocol. The R821 only
supports TFTP (Trivial File Transfer Protocol).
status – identifies the status of the current download. The
status can be any of the following descriptions:
Transfer in progress
Transfer complete
Flash burn in progress
Flash burn complete
Transfer failed
Flash burn failed
Note: The “status” parameter will only displayed if software
has been downloaded since the device was last
reset or booted.
Example :
Console> show download
server: 192.168.1.100
filename: control.bin
protocol: tftp
status: Previous Flash burn completed successfully
Console>
show fpga
Description : Show the image number and revision of the active FPGA
software.
Syntax : show fpga
Example : Console> show fpga
Active FPGA image number: 1
Rev: 1.01.02
Console>
show icmp
Description : Show operational, processing mode for end-station ICMP
messages.
Syntax : show icmp
Display
Parameters
: status – identifies the processing state of the end-station
ICMP messages.