METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 86 / 127

Radiance 10/100 Mbps Services Line Card
84
FORWARD – Normal state.
DISCARD – Transitioning into or out of a loopback
state.
Remote PARSER – State of the parser on the remote
R821.
FORWARD – Normal state.
LOOPBACK – Traffic is being looped by the remote
R821.
DISCARD – Traffic is being looped by the local
R821.
Remote MUX – Multiplexer’s state on the remote R821.
FORWARD – Normal state.
DISCARD – Transitioning into or out of a loopback
state.
Received Loopback Status – indicates what the port will do
when it receives incoming loopback requests.
PROCESS – Process loopback requests.
IGNORE – Drop loopback requests.
Example :
Console> show oamloopback 2
Port 2 Information:
Loopback Status . . . . . . . . . . . . . . : NO LOOPBACK
Local PARSER . . . . . . . . . . . . . . . : FORWARD
Local MULTIPLEXER. . . . . . . . . : FORWARD
Remote PARSER . . . . . . . . . . . . . : FORWARD
Remote MULTIPLEXER . . . . . . . : FORWARD
Received Loopback Commands . . : IGNORE
Console>
show oampeer
Description : Show information about the OAM peer for the specified
port(s).
Syntax : show oampeer <port number | all>
Parameters : port number – the actual port number.
all – specifies all ports.
Display
Parameters
: MAC Address – identifies the MAC address of the remote
port. The MAC address is derived from the most
recently received request.
OUI – identifies the remote port’s Organizational Unique
Identifier (OUI). The OUI can be used for identifying
the vendor of the remote device.
Vendor Info – indicates the vendor information of the
remote port as reflected in the latest Information
OAMPDU received.
Mode – identifies the mode of OAM operation for the
remote port.
PASSIVE – Remote port waits for the local port to
initiate OAM actions.