METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 94 / 127

Radiance 10/100 Mbps Services Line Card
92
Syntax : show sensors
Display
Parameters
: Temperature – indicates the current, minimum, and
maximum temperature reading (in degrees Celsius
and Fahrenheit) of the device or port.
1.5 Volt – indicates the current, minimum, and maximum
voltage reading (in millivolts) of the device’s 1.5-volt
supply.
2.5 Volt – indicates the current, minimum, and maximum
voltage reading (in millivolts) of the device’s 2.5-volt
supply.
3.3 Volt – indicates the current, minimum, and maximum
voltage reading (in millivolts) of the device’s 3.3-volt
supply.
5.0 Volt – indicates the current, minimum, and maximum
voltage reading (in millivolts) of the device’s 5.0-volt
supply.
Transmit Power – indicates the current, minimum, and
maximum reading (in dBm) of the SFP transmitter.
Receive Power – indicates the current, minimum, and
maximum reading (in dBm) of the SFP receiver.
Example :
Console> show sensors
Module Information:
Temperature (Celsius) : Current: 48
Min: 20 Max: 70 (IN RANGE)
Temperature (Fahrenheit): Current: 118 Min: 68 Max: 157 (IN RANGE)
1.5 Volt (Millivolts) : Current: 1540 Min: 1420 Max: 1580 (IN RANGE)
2.5 Volt (Millivolts) : Current: 2475 Min: 2375 Max: 2612 (IN RANGE)
3.3 Volt (Millivolts) : Current: 3250 Min: 3135 Max: 3448 (IN RANGE)
5.0 Volt (Millivolts) : Current: 4925 Min: 4750 Max: 5250 (IN RANGE)
Port 2 Information:
Temperature (Celsius) : Current: 43
Min: -45 Max: 105 (IN RANGE)
Temperature (Fahrenheit): Current: 109 Min: -49 Max: 221 (IN RANGE)
Transmit Power (dBm): Current: -6 Min: -9 Max: 0 (IN RANGE)
Receive Power (dBm) : Current: -15 Min: -20 Max: 0 (IN RANGE)
Console>
show
serviceclasses
Description : Show the current service class profiles and settings, including
the queue associated with each bit value.
Syntax : show serviceclasses
Parameters : Precedence – specifies the type of forwarding that will
have precedence if two modes are enabled simulta-
neously.
Priority Bits Settings – the model currently configured for
p-bits.
Example :
Console> show serviceclasses
Precedence . . . . . . . : DSCP Freeform Forwarding