METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 62 / 127

Radiance 10/100 Mbps Services Line Card
60
Set Commands
set console
Description : Set the attributes for the console port.
Note: This command is allowed only through the console
port. It is not available to telnet users.
Syntax : set console [baud <1200-57600>] [data <7 | 8>] [stop <1 |
2>] [parity <none | even | odd>] [timeout <time in
minutes>]
Parameters : baud – speed of the console port in bits per second. The
range is 1200 to 57,600; the default is 57,600.
data – number of data bits per character. The options are 7
or 8; the default is 8 bits.
stop – number of stop bits. The options are 1 or 2; the
default is 1 bit.
parity – number of parity bits and the definition of the parity
bit if one is used. The options are:
none – no parity bits. (default)
even – one bit with even parity.
odd – one bit with odd parity.
timeout – number of minutes of inactivity on the console
port that will force it to log out automatically. The
range is 0 to 120; the default is 5 minutes. If the
timeout is set to 0, automatic log out will be disabled
(i.e., the console port will never timeout).
Example :
Console> set console baud 9600 data 8 stop 1 timeout 0
Console>
set dhcp
Description : Set the DHCP client’s operational mode. Optionally,
specify the number of address acquisition retries before
reverting back to the last known valid IP address.
Syntax : set dhcp <disable | enable> [# of retries]
Parameters : disable – disables DHCP client operation
enable – enables DHCP client operation.
# of retries – integer in the range 1 to 5. The default is 3.
Example : Console> set dhcp enable 5
DHCP Enabled
Retries: 5
DHCP Server: 192.168.1.100
Console>
set download
Description : Set addressing information relative to the download server
used by the download command. The file will be
downloaded via TFTP.
Syntax : set download [server <IP address>] [filename <name of
file>]