METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 120 / 127

Radiance 10/100 Mbps Services Line Card
118
Error: Invalid
gateway IP format. The IP address gateway is not in the standard dotted decimal notation
(e.g., 192.168.1.254).
Error: Invalid IP
address format. The IP address is not in the standard dotted decimal notation (e.g.,
192.168.1.100).
Error: Invalid mask
format. The network mask is not in the standard dotted decimal notation (e.g.,
255.255.255.0).
Error: Invalid
parameter ( xxxx ). The parameter, xxxx, is not an acceptable option for the command. Make
sure the parameter is spelled correctly. If the parameter is a number,
make sure it is within the range of acceptable values.
Error: Invalid value
for mode. The OAM control mode was set incorrectly. The only acceptable options
are active or passive.
Error: IP address
entry not found. The IP address specified was not identified. Make sure you typed the IP
address correctly.
Error: Maximum
number of user
VLANs already
configured. 16 user VLANs have been configured on the services line card. No
others are allowed unless you first delete one.
Error: Missing
filename value. The name of a file is required with the command, but it is missing.
Error: Missing
model value. The model parameter was specified but the model type was not entered.
Error: Missing group
parameter. The SNMPv3 group (i.e.: read only, read write, or administrative) is
required with the command, but it is missing.
Error: Missing image
number parameter. The OS image number is required with the command, but it is missing.
Error: Missing image
parameter. The FPGA image number is required with the command, but it is missing.
Error: Missing IP
parameter. The IP address is a required field with the command, but it is missing.