METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 59 / 127

57
CLI Commands
1 192.168.1.100 00:00:d0:6a:57:b4 1 0800 RESOLVED permanent
1 192.168.1.101 00:01:d0:6d:02:00 1 0800 RESOLVED
548 s
1 192.168.1.102 00:01:5a:98:52:80 1 0800 RESOLVED 576 s
1 192.168.1.103 00:01:5a:9a:fd:58 1 0800 RESOLVED 582 s
Console>
change
password
Description : Change the current user account password. The password
is a case-sensitive ASCII string (32 characters max).
Syntax : change password
Parameters : None.
Example :
Console> change password
Enter current password: *****
Enter new password: *******
Re-enter new password: *******
Console>
download
Description : Download the operating system, FPGA firmware, configu-
ration script, or boot code. The OS and FPGA files will be
downloaded into the inactive location. For a configuration
file, the location must be specified. If you download new
boot code, it will overwrite the existing code.
Note:The download server must first be identified using
the “set download” command before this command
can be executed. Refer to “set download” on page 60
for more information.
Syntax : download <os | fpga | config1 | config2 | boot> [set | reset |
defaults]
Parameters : os – operating system software.
fpga – FPGA embedded software.
config1 – configuration file/script instance 1.
config2 – configuration file/script instance 2.
boot – bootloader software.
set – set the newly downloaded OS or FPGA software as
active.
reset – set the newly downloaded OS or FPGA software
as active and reset the card.
defaults – set the newly downloaded OS or FPGA software
as active and reset the card to its factory default settings.
Example : Console> download config1
Console> Transferring file config1.txt
Writing image to Z80 internal FLASH
FLASH verification in progress.
Locking Z80 internal FLASH.