Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 98 / 396

Swivelling front seat (example: driver's seat)
:
Unlocks the swivelling seat
;
Seat fore-and-aft adjustment
You can rotate the front seats by 50° and 180°.
The seats engage when facing in the direction of
travel as well as when facing in the opposite
direction and also engage at an angle of 50° to
the door.
X
When rotating the seat, open the respective
front door in order to avoid scraping against
the door trim.
X
Adjust the steering wheel to provide the nec-
essary space to rotate and adjust the front
seat (
Y
page 109).
X
To turn the seat: push release handle
:
in
the direction of the arrow.
X Turn the seat about 50° towards the outside
or inside to the desired position.
If there is a risk of collision with the centre
console or the B-pillar, pull lever
;
upwards
and move the front seat forwards or back to
the desired position. Then release lever
;
again.
X
In the desired position, make sure that the
front seat has engaged.
The front seat must not be able to turn or
move forwards or backwards.
Rear bench seats
General notes
Your vehicle may be fitted with standard or com-
fort rear bench seats or a seat/berth combina-
tion. The standard and the comfort rear bench
seats vary in their upholstery and functionality.
For a variable configuration of the vehicle inte-
rior in the rear, you can:
Standard rear bench seat:
R
remove the rear bench seat by releasing the
quick-locking mechanism (
Y
page 103)
R
install the rear bench seats in the face-to-face
position (
Y
page 97)
Comfort rear bench seat
R
adjust the seat backrests (
Y
page 100)
R
fold each backrest forward individually to the
table position (
Y
page 102)
R
in vehicles with a seat rail system in the vehi-
cle floor, you can only move the rear bench
seat forwards and back (
Y
page 100)
R
fold the rear bench seat forwards
(
Y
page 102)
R
remove the rear bench seat by releasing the
quick-locking mechanism (
Y
page 104)
R
fit the rear bench seats in the face-to-face
position
Seat/berth combination
R
shift the seat/berth combination forwards
and backwards (
Y
page 102)
R
remove the seat/berth combination by
releasing the quick-locking mechanism
(
Y
page 103)
R
set up the bed to accommodate two people
(
Y
page 106)
R
fold up or remove the bed extension of the
seat/berth combination (
Y
page 106)
Bench seat anchorage
G
WARNING
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
96
Seats
Seats, steering wheel and mirrors