Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 229 / 396

ASSIST is not available due to a malfunction
and is deactivated. If you confirm the mes-
sage with
3
, the display shows the next sub-
menu.
X
Press
f
or
g
to activate or deactivate
ATTENTION ASSIST.
X
Press
3
to confirm.
The next submenu is shown in the display.
Further information can be found under "ATTEN-
TION ASSIST" (
Y
page 199).
Activating/deactivating the Intelligent
Light System
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X
Press È to select the Settings menu.
X Press
3
to select the
Intell. Light Sys‐
tem
submenu.
The display shows the current status.
If the
Intell. Light System inoperative
message is shown in the display, the Intelli-
gent Light System is not available due to a
malfunction and is deactivated. If you confirm
the message with
3
, the display shows the
next submenu.
X Press
f
or
g
to activate or deactivate the
Intelligent Light System.
X Press
3
to confirm.
The next submenu is shown in the display.
When you activate the Intelligent Light System
function, you activate the following functions:
R
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
Further information can be found under "Intelli-
gent Light System" (
Y
page 117).
Setting permanent SPEEDTRONIC
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X
Press È to select the Settings menu.
X
Press
3
to select the
Winter tyres
sub-
menu.
The display shows the current speed limita-
tion setting.
X Press
f
or
g
to set permanent SPEED-
TRONIC in increments of ten. Selecting the
Off
setting switches permanent SPEED-
TRONIC off.
X Press
3
to confirm.
The next submenu is shown in the display.
Further information can be found under "Per-
manent SPEEDTRONIC" (
Y
page 191).
Selecting the permanent display func-
tion
United Kingdom only:
This function is not available. The display per-
manently shows the digital speed in
km/h
in the
header. The outside temperature is displayed
with the odometers (
Y
page 223).
For all countries except the United Kingdom:
With the
Permanent display:
function, you
can switch the display in the header between
outside temperature and speed.
If the display shows the speed in the header, the
outside temperature is shown with the odome-
ters (
Y
page 223).
The additional speedometer unit in the header is
always inverse to the speedometer unit.
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X
Using È select the
Settings
menu.
X Using
3
select the
Permanent display:
submenu.
The display shows the selected setting
Out‐
side temp.
or
Addit. speedo
.
X Change the setting by pressing
f
or
g
.
X Press
3
to confirm.
The next submenu is shown in the display.
Selecting the unit for the distance
In the
Disp. unit distance:
submenu, you
can select whether the display shows certain
information in kilometres or miles.
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X Press È to select the
Settings
menu.
X
Press
3
to select the Disp. unit dis‐
tance: submenu.
The display indicates the selected setting
km
or
miles
.
On-board computer (vehicles without steering wheel buttons)
227
On-board computer and displays
Z