Headlamps misted up on the inside
The headlamps may mist up on the inside if
there is high atmospheric humidity.
X
Switch on the dipped-beam headlamps and
drive off.
The level of moisture diminishes, depending
on the length of the journey and the weather
conditions (humidity and temperature).
If the level of moisture does not diminish:
X
Have the headlamps checked at a qualified
specialist workshop.
Interior lighting
Overview
Interior lighting buttons (example: comfort over-
head control panel)
:
p
Switches the front left-hand reading
lamp on/off
;
|
Switches the automatic interior light-
ing control on and off
=
c
Switches the front interior lighting on
and off
?
w
Switches the rear interior or load com-
partment lighting on/off
A
p
Switches the front right-hand reading
lamp on and off
The number and arrangement of the buttons is
equipment-dependent.
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time,
unless the key is in position
2 in the ignition lock.
Automatic interior lighting control
The interior lighting is activated for about
20 seconds when the key is removed from the
ignition lock. For a vehicle with steering wheel
buttons, the light delay function for the interior
lighting can be switched on and off using the on-
board computer (
Y
page 241).
X
To switch on or off: press the
|
button.
When the automatic interior lighting control is
activated, the button is flush with the over-
head control panel.
The interior lighting switches on automatically if
you:
R
unlock the vehicle
R
open a door
R
remove the key from the ignition lock
The load compartment lighting switches on
automatically if you:
R
unlock the vehicle
R
open the tailgate or rear door
R
open a sliding door
The boot lamp always switches on automatically
when the tailgate is opened.
Manual interior lighting control
X
To switch the front interior lighting on/
off: press the
c
button.
X
To switch the rear interior or load com-
partment lighting on/off: press the
w
button.
X
To switch the front reading lamps on/off:
press the
p
button.
120
Interior lighting
Lights and windscreen wipers
Содержание Vito 109 CDI/BlueTEC
Страница 1: ...Vito Operating Instructions Mercedes Benz Vito...
Страница 394: ...Permissible trailer load unbraked 750 kg Permissible nose weight 100 kg 392 Vehicle data Technical data...
Страница 396: ...Order no 6463 7355 02 Part no 447 584 22 03 Z102 Edition 03 17 4475842203Z102 4475842203Z102...